Elation COLOR SPOT 150 Manuel d'utilisateur télécharger pdf (Page 25)

- Editing program

This menu item allows you to select a program to edit or create.The COLOR SPOT 150 has one built-in program

("tESt") and the 3 free programs,each up to 99 steps.Each program step has a dynamic part(fade time) and

static part(step time).

Fade time-the time,during which effects move to the programmed position.

Step time-the time,during which effects last in the current step.

If the fixture is set as a master ,then you may edit any program in the slaves.You can't edit programs on the slave

fixtures from their control panels if the master fixture is switched on and connected to the slaves (editing is

possible by the master control panel only).

Procedure:

1. Press [ ] or [ ]-button to select the program you want to edit ("PrG.1" - "PrG.3") and press [ ].

2. Press [ ] or [ ]-button to select the desired fixture ("MASt." - "SLA.9") and press [ ]-button.

3. Press [ ] or [ ]-button to select the desired program step ("St.01" - "St.99") and press [ ]-button.

4 Press [ ] or [ ]-button to select the desired item and press [ ]-button.Now you can edit by [ ] or [ ]

buttons the DMX value for selected item:

"P.End." - a total number of the program steps,value 1-99 .This value you must set before start

programming(e.g. if you want to create program with the 10 steps,set the value onto 10).

"PAn" - a pan,value 0-255

"tilt" - a tilt,value 0-255

"F.PAn" - a fine pan, value 0-255

"F.tilt" - a fine tilt,value 0-255

"SPEd" - a speed of PAN/TILT movement,value 0-255

"Colo." - a colour , value 0-255

"r.Gob." - a rot.gobo,value 0-255

"G.rot." - a gobo rotation,value 0-255

"dimr" - a dimmer, value 0-255

"S.tim." - a step time,value 0,1-25,5 seconds

"F.tim." - a fade time,value 0,1-25,5 seconds

"COPY." - a copying the current prog. step to the next prog. step .If the last prog.step is copied to the

next prog. step ,parameter "P.End" is increased about 1 automatically (except step 99).

5. Press [ ]-button to confirm adjusted value .

6. Press [ ]-button,select next prog. step and repeat this procedure (steps 4 and 6).

The editting programs "PrG.1,PrG.2,PrG.3" are saved in the current modified fixture (master or slave1-9).

9.7 Reset function

Press [ ] button to run a reset. This option enables the COLOR SPOT 150 to index all effects (functions) and

return to their standard positions.

9.8 Special functions

Use the [ ] or [ ] buttons to browse through the special functions and select the one by pressing [ ]-button.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 31

Pas de commentaire

Elation COLOR SPOT 150 Manuel d'utilisateur Page 25